Panasonic DA-DU26C, Operating Instructions Manual

Page: 77 / 166

Tools Mode
65
ADMIN Password
The password for the machine supervisor is set to
9999
when the machine
ships from the factory. For secure control of the machine, please change this
password as soon as possible.
The Administrator Password can not be checked after it is entered. Record
this password so that it is not forgotten.
Use the following steps to change the Admin Password:
1. Press
the
Tools
button to display the Tools Main Menu on the Copier
Screen.
2. Using the ARROW buttons highlight the Admin menu option.
3. Press the
Select
button. Password Input is displayed on the Copier
Screen.
4. Using the Numeric Keypad, enter your Admin Password. The numbers
display as asterisks (*).
If you make a mistake while entering a password, press the Clear button.
5. Once the correct password is entered, the Administrator Menu is
displayed on the Copier
Screen.
6. Use the ( )
ARROW
buttons to highlight the Admin Password
selection.
7. Press the
Select
button.
8. Use the Numeric Keypad to enter a four-digit password. Each entered
number displays as an asterisk (*).
If you make a mistake while entering the password, press the Clear button.
9. Use the Numeric Keypad to enter the same four-digit password as
confirmation. Each entered number displays as an asterisk (*).
If the password entered as confirmation is identical to the first password
entered, the password is changed and the Administrator Menu is
displayed on the Copier Screen.
If the password entered as confirmation is different from the first
password entered, you must enter the password again. Repeat steps 8
and 9.
10. Press the
Exit
button. The Tools Main Menu is displayed on the Copier
Screen.
11. Press the
Tools
button to exit Tools Mode.