Panasonic CF-T2 Series Reference Manual Download Page 68

Page: 68 / 182

SD Memory Card/MultiMedia Card

MultiMedia Card (MMC)

The MultiMedia card can be used for:

Storing files, etc.

Exchanging data with devices equipped with a MultiMedia card slot

This computer may be unable to use MultiMedia cards under some conditions; for example, if
the MultiMedia card has been formatted using certain peripheral devices.

Inserting the Card

Insert the card firmly with the label side facing up and with the cut
corner in front.

Make sure you insert the card in the proper direction. Improper insertion may
result in damage to the card or slot.

Click on the desired Windows operation.

The screen on the left is an example.

When the screen on the left is not displayed, it can be activated by doing the
following:

Click [start] - [My Computer].

Right-click [Removable Disk] on SD memory card /MultiMedia Card, and then
click [Properties].

Click [AutoPlay].

Inserting/Removing the SD Memory Card/MultiMedia Card

Summary of Contents for CF-T2 Series























































































































































































Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands

Panasonic CF-T2 Series, Reference Manual

Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands