179
Glossary
Simultaneous Display
(Intel(R) Dual Display
Clone)
Displaying the same screen on both the internal LCD (
) and a connected external
display.
z
On this computer, the display can be switched between external display, internal LCD, and
simultaneous display by pressing the
Fn
+
F3
key. Simultaneous display cannot be used
until Windows startup is complete (during Setup Utility, etc.)
SRAM – Static RAM
When rewriting data (“refresh”) to protect recorded contents (as in the case of DRAM) is not
required, SRAM offers the advantage of higher data processing speed. An SRAM Card is a
device that uses Static RAM.
Standby
A function that enables the current working conditions to be stored in memory when the power
is turned off, so when the power resumes, the working conditions immediately before the power
was turned off will be displayed on the screen. When the power supply is disconnected, the
data stored in memory is lost, so always connect the AC adaptor or battery pack when the
computer is in standby mode.
SSID
ESS-ID:
System Tray
Notification Area:
T
Taskbar
The segment at the bottom of the screen (at the time of purchase) where information on
software currently being executed is displayed. When information for multiple programs is
displayed in between [start] on the taskbar and the notification area (
), you can
switch between programs by clicking on these information.
S
