Panasonic CF-T2 Series Reference Manual Download Page 51

Page: 51 / 182

Standby/Hibernation Functions

release it, a second beep

will sound and the power will be turned off forcibly. Data

not previously saved will be lost.

When the speaker function is disabled, e.g., by the key combination the

key, there will be

no beep sound.

When Closing the Display

At the time of purchase, the computer is set to go into standby mode.

Setting

Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].

Click [Stand by] or [Hibernate] for [When I close the lid of my portable
computer], and then click [OK].

Entering the standby or hibernation mode

Close the display.

The computer will enter either the standby or hibernation mode, depending on the
setting.

When entering the standby or hibernation mode, close the display correctly. If
you do not (for example, if you open the display soon after you close it), the
computer may not enter standby or hibernation mode.

Summary of Contents for CF-T2 Series























































































































































































Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands

Panasonic CF-T2 Series, Reference Manual

Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands