Panasonic CF-T2 Series Reference Manual Download Page 24

Page: 24 / 182

Display Rotation

By using the Display Rotation Tool, you can change the settings of the display rotation.

Right-click

on the notification area, and then click [Setting...].

Change the settings.

A. Changing the key combination

(Only the third key can be changed.)

B. Changing the angle

(Default: 180 degrees)

Click [OK].

Rotate the display to landscape mode (0 degree).

Right-click

on the notification area, and then click [Exit].

In the default mode, the Display Rotation Tool will start up when Windows starts up.

To restart the tool after exiting:
Click [start] - [All Programs] - [Panasonic] - [Display Rotation Tool].

NOTE

The display cannot be rotated when the [Command Prompt] is set to "Full Screen".

Changing the Settings

Exiting the Tool

Summary of Contents for CF-T2 Series























































































































































































Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands

Panasonic CF-T2 Series, Reference Manual

Search results

Summary of Contents for CF-T2 Series

Reviews:

Related manuals for CF-T2 Series

Brands by name

Popular brands