Panasonic AJ-PG50 Operating Instructions Manual Download

Page: 86 / 136

Screen Display: Deck Information (DIAG) Display

Deck Information (DIAG) Display

This displays the deck information. Deck information includes
[USER] button and warning information.

Press the [DIAG] button.

The [USER] button setting information appears.
After information is displayed the first time, the page dis-
played the last time will open from the next time.



Note:

• This information is not displayed when a menu is dis-

played.

• Switch the output destinations to display in the “GUI

OUTPUT” (

➝

page 108) and “OSD OUTPUT” (

➝

page

108) menu settings.

• Playback and other operations are not available during

DIAG display.

Press the left or right cursor button.

The information displayed changes with each press of the
button.

Information displayed

USER BUTTON:

Indicates the functions assigned to the USER buttons 1
to 6 and currently set values.

WARNING:

Warning and error information
(

➝

“Display of warning information” page 120)

Press the [DIAG] button.

The previous display is redisplayed.
You can also return to the previous display by pressing the
[EXIT] or [MENU] button.

This displays a simple waveform monitor on the screen for monitoring video.
It can be displayed by setting the “WFM TYPE” (

➝

page 108) menu item.

WAVE: Waveform display
VECTOR: Vector display



Note:

• Switch the output destination to display in the “OSD OUTPUT” (

➝

page 108) menu item.

• This information is not displayed when a menu or thumbnail is displayed.

Waveform Monitor (WFM) Display

Summary of Contents for AJ-PG50









































































































































Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands

Panasonic AJ-PG50, Operating Instructions Manual

Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands