56
Main Mode: Thumbnail Screen
A CPS password can be read from a SD memory card or input
into the unit.
Setting the password
Loading the CPS password from an SD memory
card
1
Download the latest version of P2 Viewer Plus to the
personal computer and then install it.
2
Generate a CPS password with P2 Viewer Plus and
then write it to an SD memory card.
Note:
• The generated CPS password file is encrypted, but take ap-
propriate measures to avoid security risks. For example, for-
mat the SD memory card when the file is no longer needed.
• The generated CPS password is generated as a file with the
“.p2p” extension in private/meigroup/pavcn/sbg/p2sd/ of
the SD memory card. Do not delete this file until it has been
loaded by the device.
3
Load the CPS password file.
A
Turn on the power of the unit and then insert the SD
memory card into the SD card slot.
B
Open the thumbnail screen.
C
Select the “CPS PASSWORD” - “LOAD” (
➝
page 92)
menu.
D
Select the file to use from the displayed password file list
and press the [SET] button.
• When loading of the CPS password is successful, the
“LOADINGPASSWORD COMPLETED!” message ap-
pears.
• When loading of the CPS password fails, a warning mes-
sage appears. For details on the warning, refer to “Warn-
ing Details” (
➝
page 119).
• If a warning message is displayed, check the insertion
status of the SD memory card, the save location of the
CPS password file (file name:
.p2p) generat-
ed in step 2, etc.
Setting the CPS password with the software key-
board
1
Select the “CPS PASSWORD” - “SET” (
➝
page 92)
menu item.
The software keyboard for entering the CPS password ap-
pears.
2
Enter the CPS password with the software keyboard
When you enter the password in “PASSWORD” and in
“RETRY PASSWORD” for verification and then select
“OK,” the CPS password is set.
• When CPS password input is successful, the “SETTING
PASSWORD COMPLETED!” message appears.
• When CPS password input fails, a warning message ap-
pears. For details on the warning, refer to “Warning De-
tails” (
➝
page 119).
Note:
• Up to 16 characters can be set for the password.
• Do not forget the password you entered because it cannot
be displayed on a device.
Deleting the password
When you no longer need to use the CPS function, delete the
CPS password.
To delete the CPS password, select the “CPS PASSWORD” -
“DELETE” (
➝
page 92) menu item.
“DELETING PASSWORD COMPLETED!” appears and the
CPS password is deleted.
Note:
When the setting becomes unset after deletion of the CPS pass-
word, automatic authentication of microP2 memory cards and the
encrypted format function are disabled.
Automatic CPS authentication
