Panasonic AJ-PG50 Operating Instructions Manual Download

Page: 66 / 136

Main Mode: Using the Unit Connected to a Network

Connect the AJ-WM30/AJ-WM50 wireless module (sold separately) to the [USB 3.0 HOST] port on the unit.



Notes regarding use of wireless module

For the latest information, visit the website. (

➝

“Website URL” page 9)



Note:

In France, outdoor use is prohibited.

Connect the 4G/LTE USB modem (sold separately) or other wireless module to the [USB3.0 HOST] port on the unit.



Note:

• For the USB 2.0 extension cable (sold separately), we recommend using a cable that is no longer than 0.5 m (19-5/8 inches) between

the Type A male and female connectors and is double shielded to reduce noise.

• For the 4G/LTE USB modems and other wireless modules that can be connected, visit Support Desk on the website.

(

➝

“Website

URL” page 9)

Connect the cable.

Connect the LAN cable to the [LAN] port at the rear.

Preparing for Connection

For the wireless module AJ-WM30/AJ-WM50

For wireless module other than AJ-WM30/AJ-WM50

For wired LAN

LAN cable (sold separately)

Summary of Contents for AJ-PG50









































































































































Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands

Panasonic AJ-PG50, Operating Instructions Manual

Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands