Setup Menu: Menu List
115
Setu
p Menu
SYSTEM > HOURS METER
SYSTEM > VERSION
Displays the various versions of the unit.
SYSTEM > OPTION MENU
The option menu can be displayed by pressing the [MENU] button while pressing the [DISPLAY] button.
_ is the factory default setting.
P.OFF GPS DATA
When “EXTERNAL” on the “GPS” (
➝
page 114) menu item is selected, this selects whether
the location data will be saved when the power on this unit is switched off.
HOLD:
Location data will be saved (held), and this data will be used when recording from the time
that this unit is powered on next until new location data is acquired.
CLEAR:
Location data will be cleared, and location data will not be recorded from the time that this
unit is powered on next until new location data is acquired.
HOURS METER
Item
Settings and brief function description
OPERATION
Displays the total time that the power of the unit has been on.
P.ON TIMES
Displays the total number of times that the power of the unit has been turned on.
LCD
Displays the total time that the LCD monitor of the unit has been lit.
FAN
Displays the total time that the fan of the unit has been rotating.
VERSION
Item
Settings and brief function description
VERSION
Displays the overall firmware version (representative version) of the unit.
MODEL NAME
Displays the model name of the unit.
SERIAL NO.
Displays the serial number of the unit.
NETWORK ID
Displays the network ID of the unit.
UID
Displays the unique ID of the unit.
OPTION MENU
Item
Settings and brief function description
INT LOCK MODE
Sets whether to use the function that switches the signal reference for the LCD display and output signals from the input
signals to the internal free signals. This functions only for HDMI input. This can be used if there is a discrepancy in the
frequency of the HDMI input signal and reception is not possible with the unit.
ON:
Enables free signal reference mode.
OFF:
Enables standard mode.
Note:
• Dropped frames, identical continuous frames, image overlap, and other problems may occur in the LCD display,
output signals, and recorded video.
• When the INT LOCK MODE function is operating, “INT LOCK” is displayed in the additional information display area
on the LCD monitor.
AREA SETTING
Selects the area of use for the unit. The following settings can be set in the “AREA SELECT” screen.
NTSC:
Selects an NTSC area other than Japan.
NTSC (J):
Selects Japan.
PAL:
Selects a PAL area.
Item
Settings and brief function description
FREQ indications
59.94Hz
50Hz
SYSTEM > SYSTEM SETUP (Continued)
