Using a Keyboard:
117
Using a Keyboard
Using a Keyboard
The full keyboard is displayed when metadata input or other
alphanumeric input is required.
Move the cursor to the character you want to enter and press
the [SET] button.
Use the cursor buttons to move the cursor.
The keys on the keyboard have the functions listed below.
Note:
• Pressing the [RESET] button deletes all entered characters.
• Pressing the [EXIT] button displays a confirmation message be-
fore exiting the keyboard. Select “YES” and press the [SET] but-
ton to close the software keyboard.
• Switching Caps also changes the symbols on the keyboard.
The numeric keyboard is displayed when you only need to en-
ter numbers.
Move the cursor to the number you want to enter and press
the [SET] button.
Use the cursor buttons to move the cursor.
The keys on the keyboard have the functions listed below.
To use a USB keyboard for input, connect it to the USB 3.0
connector when a menu that displays the full keyboard or nu-
meric keyboard is selected.
The type of keyboard must first be set in the menu.
(
➝
“KEYBOARD” page 102 menu item)
Note:
• Input is limited to alphanumeric characters and symbols.
• Some keyboards may not work properly.
Full Keyboard
Key
Function
BS
Deletes one character.
Caps
Toggles between upper and lower case.
OK
Saves the entered characters and closes the
software keyboard.
EXIT
Discards the entered characters and closes the
software keyboard.
d
Moves the cursor to the first character.
b
Moves the cursor 1 character space back
a
Moves the cursor 1 character space forward
c
Moves the cursor to the location after the last
character
Numeric Keyboard
Key
Function
BS
Deletes one character.
OK
Saves the entered characters and closes the
software keyboard.
EXIT
Discards the entered characters and closes the
software keyboard.
b
<When entering decimals>
Moves the cursor 1 character space back
<When entering a time code>
Moves the cursor 1 item space back
a
<When entering decimals>
Moves the cursor 1 character space forward
<When entering a time code>
Moves the cursor 1 item space forward
USB Keyboard
