Main Mode: Using the Unit Connected to a Network
79
M
a
in M
o
de
A folder selected from an FTP server on the network can
be written back to an SD memory card.
1
Display the FTP EXPLORE screen.
2
The folder screen of the FTP server appears.
The folders on the set server are displayed. Use the cursor
buttons to select the transfer source folder.
3
Press the [MENU] button to display the menu.
(
➝
“Menu Operations” page 89)
4
Use the cursor buttons to align the cursor with the
“IMPORT” (
➝
page 93) menu item and press the
[SET] button.
Press “OK” in the SD IMPORT confirmation dialog box that
appears to start writing back the data to the SD memory
card.
Note:
• To stop importing, press the [SET] button, align the cursor
with “YES” in the “CANCEL” confirmation message, and
press the [SET] button. Partially imported files in the SD
memory card are deleted, but successfully imported files re-
main.
• After importing starts, disconnection errors will no longer be
detected.
Use the above procedure to stop an import operation that
has stalled.
• Writing back may take a long time depending on factors
such as the number of files, file sizes, and network condi-
tions.
• Any files with the same path names on the SD memory card
will be overwritten without any warning message being dis-
played. However, if the path names are the same but the
types differ (folder and file), an error is generated.
• To prevent inadvertent overwriting, format the SD memory
card before importing whenever possible.
• To use SSH, the FTP server must be SSH compliant.
• Setting SSH to “ENABLE” will reduce the transfer speed.
When importing is completed, “COPY COMPLETED!” ap-
pears.
Clips recorded in the P2 card can be automatically transferred
to a server device on the network during recording/playback
with the unit.
The rec during upload function has the following two modes:
• Automatic transfer mode:
Uploads recorded clips in order after the rec during upload
function is enabled.
• Manual selection mode:
Uploads clips selected beforehand.
To use the rec during upload function, network settings and
FTP client settings need to be configured beforehand.
1
Establish the network connection between the unit
and a server device.
Refer to “Client settings” (
➝
page 71) for the settings.
2
Set the unit’s menu - “REC DURING UPLOAD” (
➝
page 105) to “ENABLE”.
3
Select the type of clip to upload in the unit’s menu
“AUTO UPLOAD” (
➝
page 105).
REC CLIP (PROXY):
Upload target is proxy data of recorded clips.
REC CLIP:
Upload target is recorded clips (main recording data and
proxy data).
DISABLE:
Recorded clips are not upload targets.
4
Record.
Clips are registered in the upload list immediately after re-
cording is stopped, and then recorded clips are automat-
ically transferred.
The LCD monitor shows the operation status of the rec dur-
ing upload function. In addition, the thumbnail screen
shows the operation status of the rec during upload func-
tion and the transfer status of clips.
Writing back from an FTP server
(import)
Rec during upload function
Transferring recorded clips automatically
(automatic transfer mode)
