Panasonic AJ-PG50 Operating Instructions Manual Download

Page: 102 / 136

102

Setup Menu: Menu List

I/F SETUP > CLOCK
For details, refer to “Setting the Year, Month, Day, and Time” (

➝

page 25).

I/F SETUP > BASIC

_ is the factory default setting.

I/F SETUP

CLOCK

BASIC

Item

Settings and brief function description

FREQ indications

BEEP

Turns the beep sound on or off.

ON:

Outputs a beep sound.

OFF:

Does not output a beep sound.

Note:

A beep sound is also output from the [PHONES] jack.

KEYBOARD

Sets the type of keyboard to be connected.

QWERTY(101)
QWERTY(109)
AZERTY
QWERTZ

POWER ON GUI

Sets whether to display the thumbnail screen at power-on.

THUMBNAIL:

Displays the thumbnail screen.

OFF:

Does not display the thumbnail screen.

AUTO POWER

OFF

Sets the button operation inactivity period after which to turn off the power automatically.

10min:

Turns off the power after 10 minutes of inactivity.

30min:

Turns off the power after 30 minutes of inactivity.

60min:

Turns off the power after 60 minutes of inactivity.

90min:

Turns off the power after 90 minutes of inactivity.

OFF:

Does not turn off the power of the unit and maintains the energized state.

Note:

• Even when this setting is other than OFF, the power is not turned off during playback

(including variable speed playback, fast forward/fast rewind, and pause) and record-
ing.

• When the unit is connected to an external device with a USB cable and is in the ener-

gized state or when the unit is in PLAYLIST mode, the power is not turned off even if the
above button activity does not occur.

• Set this to “OFF” when streaming video. If you set a time, the power will turn off due to

inactivity.

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

59.94Hz

50Hz

Summary of Contents for AJ-PG50









































































































































Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands

Panasonic AJ-PG50, Operating Instructions Manual

Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands