Panasonic AJ-PG50 Operating Instructions Manual Download

Page: 3 / 136

Read this first! (continued)

Read this first!:

this

irst
!

indicates safety information.

FCC NOTICE (U.S.A.)

NOTIFICATION (Canada)

Declaration of Conformity

Model Number:

AJ-PG50

Trade Name:

Panasonic

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102

Support contact:

1-800-524-1448

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized

modifications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the booklet “Something About Interference” available from FCC local regional offices helpful.

FCC Warning:

To assure continued FCC emission limit compliance, follow the attached installation instructions and the user must use

only shielded interface cables when connecting to host computer or peripheral devices. Also any unauthorized changes or

modifications to this equipment could void the user’s authority to operate this device.

CAN ICES-3 (B)/NMB-3(B)

For USA

A lithium ion/polymer battery that is recyclable powers the product you have purchased. Please call 1-800-8-BAT-

TERY for information on how to recycle this battery.

Notice (U.S.A. only):

Disposal may be regulated in your community due to Environmental considerations. For disposal or recycling information,

please visit Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.

Note:

The rating plate is on the underside of the Recorder, Battery Charger and AC Adaptor.

For Turkey
AEEE Yönetmeli

ine Uygundur.

AEEE Complies with Directive of Turkey.

Summary of Contents for AJ-PG50









































































































































Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands

Panasonic AJ-PG50, Operating Instructions Manual

Search results

Summary of Contents for AJ-PG50

Reviews:

Related manuals for AJ-PG50

Brands by name

Popular brands