82
USB Device Mode:
USB Device Mode
A USB 2.0 connection with a computer or other device allows
you to use the P2 cards inserted in the P2 card slots of this unit
as mass storage devices. Note that a separate USB driver,
which can be downloaded free of charge from the Panasonic
website, needs be installed on the computer.(
➝
“
Website
URL
” page 9)
You can use P2 Viewer Plus, which can be downloaded free
of charge from the Panasonic website, to manipulate clips
stored on P2 cards.
For the URL(
➝
“
Website URL
” page 9)
Note:
For details on connecting, refer to the operating instructions sup-
plied with your computer and software.
1
Press the [MODE] button when the unit is in the idle
state.
2
Align the cursor (
) with “USB DEVICE” in the selec-
tion screen and press the [SET] button.
“USB DEVICE” flashes on the LCD monitor and the unit
switches modes. After the mode is switched, “USB DE-
VICE CONNECTING...” appears on the LCD monitor.
This message is replaced with the “USB DEVICE CON-
NECT” message when the connection with the computer
is completed.
3
Perform operations in USB device mode.
Note:
Please refer to the operating instructions supplied with your
computer and software.
4
Press the [MODE] button to return to regular mode.
Note:
Recording, playback, and most other operations are not avail-
able in USB device mode.
