manualshive.com logo in svg

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Share
Download
PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 73

PA-7000 Series Firewall Installation

STEP 2 |

Move the brackets from the mid-mount position to the front-mount position. The brackets

are in two sections on each side of the chassis (the front section and the back section).

Remove the six screws on each side of the chassis where the two brackets come together in

the mid-mount position and then remove 25 screws to remove each of the four brackets (two

brackets on each side). There is a total of 112 bracket screws (56 on each side).

Remove the front brackets (A and B) and back brackets (C and D) from the chassis. The back

brackets (C and D) are not needed in this configuration.

PA-7000 Series Firewall Hardware Reference

73

©

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands