manualshive.com logo in svg

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Share
Download
PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 19

PA-7000 Series Firewall Overview

Item

Component

Description

7

Electrostatic Discharge

(ESD) ports

Provides a grounding point that you use when removing

or installing chassis components. Secure the provided

wrist strap end of the ESD strap around your wrist and

plug the other end into one of the ESD ports.

PA-7050 Back Panel (AC)

The following image shows the back panel of the PA-7050 firewall (with AC power supplies

installed) and the table describes each back panel component.

Item Component

Description

1

Ground stud

Two-post stud used to ground the chassis to earth ground.

Use the provided 6 AWG two#post ground lug to connect

a grounded cable (not included) to the two#post stud.

PA-7000 Series Firewall Hardware Reference

19

©

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands