PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 202

Page: 202 / 220

Service the PA-7000 Series Firewall Hardware

3. Remove a new 2TB drives from the packaging and pull the AMC handle out to prepare

it for installation into the LPC. Install the drive into the empty drive slot (A1 in this

example) and then push in the release handle on the AMC to lock it to the chassis.

4. Copy the data from the 1TB (A2) drive to the newly installed 2TB (A1) drive:

admin@PA-7080>

request

system raid slot s7 copy from A2 to A1

To view the status of the copy process, run the following command:

admin@PA-7080>

show

PA-7000 Series Firewall Hardware Reference

202

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands