manualshive.com logo in svg

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Share
Download
PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 20

PA-7000 Series Firewall Overview

Item Component

Description

2

Power Entry Module

(PEM) AC power inlets

Connects the power source to the power supplies located

on the front of the chassis. The front power supplies

distribute power to all chassis components.
The AC PEM contains four 20-amp AC power inlets—each

accompanied by a switch—one pair, inlet with switch, for

each power supply.
If you are facing the back of the chassis, the inlet and

switch on the far left side provides power to the power

supply on the far right side when facing the front of the

chassis.
For information on connecting power, see 

Connect Power

to a PA-7000 Series Firewall

.

The AC PEMs are not field-serviceable.

3

Power Entry Module

(PEM) AC power switches

Provides switches to power on or off the AC power

supplies. Each switch has a circuit breaker that will trip if

the load reaches 25-amps.

PA-7050 Front Panel (DC)

The following image shows the front panel of the PA-7050 firewall (with DC power supplies

installed).

The only difference between the front panel of the AC model and the front panel of the

DC model is that the DC model has four front DC power supplies instead of four AC power

supplies. For descriptions of the front panel components, see 

PA-7050 Front Panel (AC)

and for information on connecting DC power, see 

Connect Power to a PA-7000 Series

Firewall

.

PA-7000 Series Firewall Hardware Reference

20

©

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands