PA-7000 Series Firewall Module and Interface Card Information
same install and release levers as the LPC—version 1 does not; and the USB port is in a different
location. There are no functional differences between the two versions.
Figure 1: PA-7050 Version 1 SMC, First Generation
Figure 2: PA-7050 Version 2 SMC, First Generation
Figure 3: PA-7080 SMC, First Generation
Item
Component
Description
1
HA1-A
Ethernet 10/100/1000Mbps port for high availability
(HA) control and synchronization. Connect this port
directly from HA1-A port on the first firewall in an HA
pair to the HA1-A port on the second firewall in the
pair, or connect these two ports to each other through a
switch or router.
You cannot configure HA1 (control) on NPC data ports or
the MGT port.
2
HA1-B
Ethernet 10/100/1000Mbps port for high availability
(HA) control and synchronization. Use this port as a
backup to HA1-A. Connect this port directly from HA1-B
port on the first firewall in an HA pair to the HA1-B port
on the second firewall in the pair, or connect these two
ports to each other through a switch or router.
PA-7000 Series Firewall Hardware Reference
35
©
2023 Palo Alto Networks, Inc.
