manualshive.com logo in svg

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Share
Download
PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 117

PA-7000 Series Firewall Installation

STEP 2 |

Put the provided ESD wrist strap on your wrist ensuring that the metal contact is touching

your skin. Then attach (snap) one end of the ground cable to the wrist strap and remove the

alligator clip from the banana clip on the other end of the ESD grounding cable. Plug the

banana clip end into one of the ESD ports located on the front of the chassis before handling

ESD sensitive hardware. For details on the ESD port location, see 

PA-7080 Front Panel (AC)

.

STEP 3 |

Remove the two nuts and star washers from the ground studs located on the back of the

chassis on the upper left side.

STEP 4 |

Crimp a 6-AWG wire to the grounding lug and connect the other end to your earth ground

point.

STEP 5 |

Connect the two-post lug connector to the two-post studs on the chassis using the provided

star washers and nuts and then torque the nuts to 50 in-lbs. You can install the lug in a

vertical or horizontal position. Be careful not to strip the threads on the nuts and lug studs.

Figure 8: PA-7080 Ground Cable Connection

PA-7000 Series Firewall Hardware Reference

117

©

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands