manualshive.com logo in svg

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Share
Download
PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 211

PA-7000 Series Firewall Specifications

Specification

Value

• Chassis (AC)—173 lbs (78 kg 471.47 g)

Includes the chassis, two fan trays, air filter, and four power

supplies. Does not include the blank slot covers, SMC, NPCs,

or LPC.
Total Weight (fully loaded)— 299.3 lbs (135 kg 760.19 g)
Includes the chassis weight above, plus the SMC, LPC, ten

NPCs, and eight AC power supplies.

• Chassis (DC)—172 lbs (78 kg 17.88 g)

Includes the chassis, two fan trays, the air filter, four DC

power supplies, and the DC Power Entry Module (PEM).

Does not include the blank slot covers, SMC, NPCs, or LPC.
Total Weight (fully loaded)— 298.3 lbs (135 kg 306.59 g)
Includes the chassis weight above, plus the SMC, LPC, ten

NPCs, and a total of eight DC power supplies.

Chassis component weights

Switch Management Card (SMC)

• PA-7050-SMC—11 lbs (4 kg 989.52 g)
• PA-7080-SMC—12.5 lbs (5 kg 669.90 g)
• PA-7050-SMC-B—14.5 lbs (6 kg 577.09 g)
• PA-7080-SMC-B—14.5 lbs (6 kg 577.09 g)

Network Processing Card (NPC)

• 9.4 lbs (4 kg 263.77 g)
• PA-7000-100G-NPC-A—12.5 lbs (5 kg 669.91 g)

Log Card

• Log Processing Card (LPC)

• LPC only with no drives—6.4 lbs (2 kg 902.99 g)
• Advanced Mezzanine Card (AMC) —0.6 lbs (272.16 g)

Each AMC includes a 2.5” SATA disk drive.

• LPC fully loaded with four AMCs—8.8 lbs (3 kg 991.61 g)

• Log Forwarding Card (LFC)—9.5 lbs (4 kg 309.13)

Fan tray

• PA-7050 First-generation fan tray

• PA-7050-FANTRAY—9.8 lbs (4 kg 445.20 g)

PA-7000 Series Firewall Hardware Reference

211

©

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands