PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 15

Page: 15 / 220

PA-7000 Series Firewall Overview

The PA-7000 Series firewalls (PA-7050 and PA-7080) are high performance modular firewalls

designed for large enterprise and carrier class environments. These multi-blade chassis can

leverage either AC or DC power and have hot-swappable Network Processing Cards (NPCs) to

allow for expansion as needs grow. You can install up to six NPCs in the PA-7050 firewall and

up to ten NPCs in the PA-7080 firewall. These firewalls also include a dedicated high availability

(HA) control port (HA1), as well as two dedicated 80Gb QSFP HA ports for HA2 (data link) and

HA3 (packet forwarding) functions. These dedicated HA ports enable PA-7000 Series firewalls to

function with full hardware redundancy in either an active/passive or active/active configuration.

Additionally, to improve logging performance, the firewalls use a dedicated log card to handle all

log processing tasks.

First Supported PAN-OS

Software Release:

•

PAN-OS 6.0

—PA-7050 firewall

•

PAN-OS 7.0

—PA-7080 firewall

The minimum supported PAN-OS software also varies based on the installed components. For

example, if you install a PA-7000 20GQXM NPC, the firewall must have PAN-OS 7.1 or later

installed. In the PAN-OS 9.0 release, there are also requirements to install newer components

based on the installed hardware. For example, if you install the PA-7000-100G-NPC in a PA-7050

firewall, you must also install the PA-7050 second-generation fan trays (PA-7050-FANTRAY-L-

A (left) and PA-7050-FANTRAY-R-A (right)). For more information on these requirements, see

PA-7000 Series Firewall Module and Interface Card Information

•

PA-7050 Front and Back Panel Descriptions

•

PA-7080 Front and Back Panel Descriptions

Summary of Contents for PA-7000 Series





























































































































































































































Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands