PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 21

Page: 21 / 220

PA-7000 Series Firewall Overview

PA-7050 Back Panel (DC)

The following image shows the back panel of the PA-7050 firewall (with DC power supplies

installed). The AC inlets and switches are not functional and must remain covered using the

provided cover plate.
The only differences between the back panel of the AC model and the back panel of the DC

model is that the DC model does not have a Power Entry Modules (PEM); the DC power

source connects directly to the front of the power supplies. For descriptions of the back panel

components, see

PA-7050 Back Panel (AC)

PA-7000 Series Firewall Hardware Reference

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands