PaloAlto Networks PA-7000 Series Hardware Reference Manual Download Page 141

Page: 141 / 220

Service the PA-7000 Series Firewall Hardware

STEP 4 |

Remove the eight screws that secure the PEM to the chassis.

STEP 5 |

Remove the failed PEM from the chassis using the handles on each side of the PEM.

STEP 6 |

Carefully slide the replacement PEM into the PEM slot and secure it with the eight screws.

STEP 7 |

Reconnect the DC power cables, ensuring that you install them in the correct polarity.

Secure each DC lug to the DC studs with the star washers and nuts and torque to 50 in-lbs.

Be careful not to strip the nuts and lug studs.

STEP 8 |

Turn on the DC power feed.

PA-7000 Series Firewall Hardware Reference

141

2023 Palo Alto Networks, Inc.

Summary of Contents for PA-7000 Series





























































































































































































































Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands

PaloAlto Networks PA-7000 Series, Hardware Reference Manual

Search results

Summary of Contents for PA-7000 Series

Reviews:

Brands by name

Popular brands