manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PREVENTIVE MAINTENANCE SCHEDULE

PART 8: MAINTENANCE AND SERVICE

– 146 –

 Y53-6032

(R05/10)

Table 2

Preventative Maintenance Schedule

SYSTEM

COMPONENT

MAINTENANCE TASK

Recommended

PM Interval

I

A

B

C

D

E

Frame

Fifth Wheel

Check the kingpin lock and plate for wear and function; lubricate (NLGI #2 
grease).

X

Frame Fasteners

Check for tightness; tighten to the specified torque value as required (see 

page 208

).

X

Crossmembers and Mounting 
Brackets

Inspect for cracks and loose fasteners. Replace or tighten to the specified 
torque value as required (see 

page 208

).

X

Front Axle

Steering knuckles, thrust 
bearings, kingpins, drawkeys, 
tie rod ends, steering stops, & 
bushings

Inspect for wear and damage and for endplay. Shim or replace as required 
(see 

page 207

).

X

Kingpin bushings & tie rod 
ball ends

Lubricate with approved grease.

X

Total Vehicle Alignment

Check and adjust as required.

X

X

Drawkeys

Tighten nuts

X

X

Front

Suspension

Front Spring

Inspect for cracked leaves, worn bushings, & excessive corrosion.

X

Spring Pins & Shackles

Inspect for worn parts and excessive joint clearance. Shim or replace as 
required.

X

Spring Pins

Lubricate.

X

Y53-6032.book  Page 146  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Crown Forklift Operator'S Manual preview
Forklift
Brand: Crown Pages: 21
GMC C Series 1993 Repair Manual preview
C Series 1993
Brand: GMC Pages: 264
Sealey PT1150 Instructions preview
PT1150
Brand: Sealey Pages: 2
Sealey MS0651 Quick Start Manual preview
MS0651
Brand: Sealey Pages: 2
Sealey CST989.V3 Manual preview
CST989.V3
Brand: Sealey Pages: 2
Sealey CST980.V2 Quick Start Manual preview
CST980.V2
Brand: Sealey Pages: 2
Sealey PT1150SC.V3 Quick Start Manual preview
PT1150SC.V3
Brand: Sealey Pages: 4
Sealey CST991.V2 Instructions preview
CST991.V2
Brand: Sealey Pages: 2
Sealey Power Products HPT1000 Instructions preview
Power Products HPT1000
Brand: Sealey Pages: 3
Sealey PT1150SC.V2 Instructions preview
PT1150SC.V2
Brand: Sealey Pages: 4
Sealey DH01.V2 Instructions preview
DH01.V2
Brand: Sealey Pages: 2
Sealey Power Products HPT150 Instructions preview
Power Products HPT150
Brand: Sealey Pages: 3
Sealey HPT1000 Instructions preview
HPT1000
Brand: Sealey Pages: 3
Sealey CST997.V2 Manual preview
CST997.V2
Brand: Sealey Pages: 3
Sealey PT1150LD Instructions Manual preview
PT1150LD
Brand: Sealey Pages: 6
Sealey CST806 Instructions Manual preview
CST806
Brand: Sealey Pages: 6
Sealey HPT750 Instructions Manual preview
HPT750
Brand: Sealey Pages: 7
Hino Series 155 Quick Reference preview
Series 155
Brand: Hino Pages: 4

Brands by name

Popular brands

Load more brands