manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

INSTRUMENTS AND CONTROLS

PART 4: CONTROLS AND DISPLAYS

– 26 –

 Y53-6032

(R05/10)

to the skin.  Allow adequate cooling time before
working on or near any part of the exhaust sys-
tem.

14.Emissions, Malfunction Indicator Lamp

Illuminates when an engine emissions failure
has occurred. The vehicle can be safely
driven but should be serviced to correct the
problem. The situation should not be consid-
ered an emergency. In some cases, the Mal-
function Indicator Lamp will activate in
conjunction with the High Exhaust Tempera-
ture, Diesel Particulate Filter (DPF) and Die-
sel Emission Fluid (DEF) Warning Lights.

15. Emission, Diesel Exhaust Fluid Lamp

Illuminates when the Diesel Exhaust Fluid
(DEF) tank level is low. The vehicle can be
safely driven but the DEF tank should be filled
at the next opportunity. The situation should
not be considered an emergency.

16.Engine, Check Engine

Illuminates when a problem exists, but the
vehicle can still be safely driven. Vehicle
should be serviced to correct the problem
but the situation should not be considered
an emergency. 

17.Engine, Ether Start

Illuminates when ether start switch is on.

18. Engine, Heater

Illuminates when Engine Heater switch is on.

19. Engine, Low Coolant Level

Illuminates with an audible alarm indicating
critically low coolant level. The vehicle must
be serviced to correct the problem but the sit-
uation should not be considered an emer-
gency. 

Y53-6032.book  Page 26  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

HELI green Series Operator'S Manual preview
green Series
Brand: HELI Pages: 82
HELI CPD15 Operation & Service Manual preview
CPD15
Brand: HELI Pages: 90
Mack CSM 2010 Operator'S Handbook Manual preview
CSM 2010
Brand: Mack Pages: 232
U-Line BT H-1003 Manual preview
BT H-1003
Brand: U-Line Pages: 6
Jet JTX-2748 Operating Instructions And Parts Manual preview
JTX-2748
Brand: Jet Pages: 16
Volvo FH VAL-BAS4 Wiring Diagram preview
FH VAL-BAS4
Brand: Volvo Pages: 244
Volvo FH Series Wiring Diagram preview
FH Series
Brand: Volvo Pages: 256
Volvo VHD Operator'S Manual preview
VHD
Brand: Volvo Pages: 300
Movexx T1000-D Manual preview
T1000-D
Brand: Movexx Pages: 61
Eagle Group A218901 Assembly Instructions preview
A218901
Brand: Eagle Group Pages: 2

Brands by name

Popular brands

Load more brands