manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual, Page: 61 / 239

Share
Download
Paccar Peterbilt 587 Owner'S Manual Download Page 61

PART 4: CONTROLS AND DISPLAYS

GAUGES

(R05/10)

Y53-6032 

– 59 –

Glove Compartment

To open your glove compartment, pull the latch. To close
it, push the cover up and press to latch it.

The glove compartment can be locked. Turn your glove
box key clockwise (right) to lock and counterclockwise
(left) to unlock.

WARNING! Do not drive with the glove com-
partment open, it can be dangerous. In an
accident or sudden stop, you or a passenger
could be thrown against the cover and be
killed or injured. To reduce the risk of death or
personal injury during an accident or sudden
stop, keep the glove compartment closed
when the vehicle is in motion.

Gauges

On the pages that follow you will find descriptions of some
of the gauges on your instrument panel. For more infor-
mation about using them in driving, see 

“PART 7: START-

ING & OPERATING THE VEHICLE”

. Also check the Index

under the name of the gauge or function you want to know
more about.

WARNING! Do not ignore a warning light or
audbile alarm. These signals tell you some-
thing is wrong with your vehicle. It could be a
failure in an important system, such as the
brakes, which could lead to an accident
involving death or personal injury. Have the
appropriate system checked immediately.

Y53-6032.book  Page 59  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments