manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 4: CONTROLS AND DISPLAYS

GAUGES

(R05/10)

Y53-6032 

– 73 –

Peterbilt Navigation System

Your vehicle may be equipped with a Peterbilt Navigation
System. This system is a Global Positioning Satellite
(GPS)-linked computer. It receives input from multiple
sources to locate your vehicle. Read and understand the
Supplemental Navigation System Owner’s Manual and
observe the Warnings, Cautions, and Notes that follow
before using the system.

WARNING! Verify legal weight and height
restrictions for the route suggested by the
Navigation System. Failure to verify height
restrictions could lead to death or personal
injury. Failure to verify weight restrictions
could also result in a traffic infraction.

WARNING! 

 

Only glance at the Navigation

System monitor while driving. Prolonged peri-
ods of viewing while driving could result in an
accident and death or possible personal
injury.

WARNING! Do not program the Navigation
System while driving. Always stop your vehi-
cle when programming or changing the set-
tings on the Navigation System. Programming
the system while driving can cause you to
take your eyes off the road, which could result
in an accident. Failure to do so could lead to
death, serious injury or equipment damage.

CAUTION: Do not rely on the Navigation System
to route you to the closest emergency services.
Not all emergency services are in the database. 

NOTE: Regardless of how and where the naviga-

tion system directs you, it is your responsibility to

operate the vehicle in a safe and legal manner.

NOTE: Ensure the volume level of all audio

devices is set to a level that still allows you to hear

outside traffic and emergency vehicles.

Y53-6032.book  Page 73  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

jcb 506-23 Operator'S Manual preview
506-23
Brand: jcb Pages: 31
Chevrolet One Series 1955 Owner'S Manual preview
One Series 1955
Brand: Chevrolet Pages: 49
Powertow 65 EZ VIPER Owner'S Manual preview
65 EZ VIPER
Brand: Powertow Pages: 12
swaploader SL-220 Parts And Operation Manual preview
SL-220
Brand: swaploader Pages: 128
Paccar Kenworth T170 2011 Builder'S Manual preview
Kenworth T170 2011
Brand: Paccar Pages: 179
Haklift HAVA2500EC Original Instructions Manual preview
HAVA2500EC
Brand: Haklift Pages: 26
Paccar Kenworth C500 2012 Manual preview
Kenworth C500 2012
Brand: Paccar Pages: 276
Victory BXH-5x10 Owner'S Manual preview
BXH-5x10
Brand: Victory Pages: 29
Volvo VAH 2013 Operator'S Manual preview
VAH 2013
Brand: Volvo Pages: 175
Volvo L120E Operator'S Manual preview
L120E
Brand: Volvo Pages: 204
Volvo FH 2 Series Service Manual preview
FH 2 Series
Brand: Volvo Pages: 242
Magliner Y-Cable Assembly Instructions Manual preview
Y-Cable
Brand: Magliner Pages: 8
Lionel Husky Stack Owner'S Manual preview
Husky Stack
Brand: Lionel Pages: 4

Brands by name

Popular brands

Load more brands