manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 5: SEAT AND RESTRAINT SYSTEMS

SEAT

(R05/10)

Y53-6032 – 

75 

–

PART 5: SEAT AND RESTRAINT SYSTEMS

Seat

For information on the features and adjustment of the
seat, see the seat manufacturer’s literature included with
the vehicle.

WARNING! Do not drive or ride with your seat
back in the reclined position. You could be
injured or killed by sliding under the seat
belts in a collision.

WARNING! Do not adjust the driver's seat
while the vehicle is moving. A sudden or
unexpected seat movement can cause the
driver to lose control of the vehicle causing
death or personal injury. Make all adjustments
to the seat while the vehicle is stopped. 

• After adjusting the seat and before driving

off, always check to be sure that the seat is
firmly latched in position.

Seat Belts And Their Proper Use

Seat (or safety) belts have proven to be the single most
effective means available for reducing the risk of serious
injury and death in motor vehicle accidents. It’s not just an
opinion -- it’s a fact: Seat belts save lives.

WARNING! Do not drive vehicle without your
seat belt and your riders’ belts fastened.
Riding without a safety belt which is properly
fastened can lead to increased death or injury
in an accident. Unbelted riders could be
thrown into the windshield or other parts of
the cab or could be thrown out of the cab.
They could strike another person. Injuries can
be much worse when riders are unbelted.
Always fasten your seat belt and be sure any-
one riding with you does the same.

Y53-6032.book  Page 75  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

U-Line H-2708 Quick Start Manual preview
H-2708
Brand: U-Line Pages: 3
DongFeng EQ1040GLJ4-CMD1-D Manual preview
EQ1040GLJ4-CMD1-D
Brand: DongFeng Pages: 75
Volvo FH12 LHD Wiring Diagram preview
FH12 LHD
Brand: Volvo Pages: 128
JAC HFC4181KR1 Owner'S Manual preview
HFC4181KR1
Brand: JAC Pages: 112
Navistar ProStar+ Operation And Maintenance Manual preview
ProStar+
Brand: Navistar Pages: 304
Komatsu HM250-2 Brochure preview
HM250-2
Brand: Komatsu Pages: 6
Western Star 47X 2020 Maintenance Manual preview
47X 2020
Brand: Western Star Pages: 166
Simpro M25 Series Owner'S Manual preview
M25 Series
Brand: Simpro Pages: 10

Brands by name

Popular brands

Load more brands