manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 4: CONTROLS AND DISPLAYS

DASH-MOUNTED FEATURES

(R05/10)

Y53-6032 

– 55 –

NOTE: Do not stay in the vehicle with the engine

running or idling for more than 10 minutes with

the vehicle’s Heater / AC ventilation system in

RECIRC or at LOW FAN SPEED. Even with the

ventilation system On, running the engine while

parked or stopped for prolonged periods of time is

not recommended.

NOTE: If you are required to idle your vehicle for

long periods of time, install an auxiliary heater or

automatic idle control. These auxiliary devices

can reduce fuel consumption and save you

money.

NOTES:When idling for short periods of time

•Set the heating or cooling system to Heat or
A/C

•Set the fan to Medium or High speed

•Set the controls to FRESH AIR 

NOTE: If other vehicles are parked next to you

idling, move your vehicle or do not stay in your

vehicle for prolonged periods of time.

To Set the Heater-Air Conditioning Controls

The cab’s control panel may have up to six controls (see
illustration below):

• A rotary knob (A) in the upper left portion controlling

the blower speed with four settings.

• A rotary knob (B) in the upper center portion control-

ling the movement of air within the cab. This control is
continuously variable through five modes (clockwise
from left):

– Panel

– Panel/Floor

– Floor

– Defrost/Floor

– Defrost

• A rotary knob (C) in the upper right portion controlling

the air temperature.

• A rocker switch (D) in the lower left portion to engage

the air conditioner compressor.

Y53-6032.book  Page 55  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Ravas 5200 User Manual preview
5200
Brand: Ravas Pages: 36
Labrie ALLEY -GATOR RIGHT-HAND Maintenance Manual preview
ALLEY -GATOR RIGHT-HAND
Brand: Labrie Pages: 108
HELI 14-850 Operation And Maintenance Manual preview
14-850
Brand: HELI Pages: 20
OEG 311850020 User Manual preview
311850020
Brand: OEG Pages: 20
Landoll 336C Operator'S Manual preview
336C
Brand: Landoll Pages: 70
Jungheinrich EFX 410 Operating Instructions Manual preview
EFX 410
Brand: Jungheinrich Pages: 404
unicraft PHW 1000 K Operating Instructions Manual preview
PHW 1000 K
Brand: unicraft Pages: 32
Hexagon MT-45 Service Manual preview
MT-45
Brand: Hexagon Pages: 98
Buyers Products Company TGC25006V Installation Instructions preview
TGC25006V
Brand: Buyers Products Company Pages: 2
Surtek TRH5 Quick Start Manual preview
TRH5
Brand: Surtek Pages: 12

Brands by name

Popular brands

Load more brands