manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual, Page: 38 / 239

Share
Download
Paccar Peterbilt 587 Owner'S Manual Download Page 38

STEERING COLUMN-MOUNTED CONTROLS

PART 4: CONTROLS AND DISPLAYS

– 36 –

 Y53-6032

(R05/10)

High Beam Headlamps

NOTE: 

The headlamps must be “ON” for the high

beam switch to operate.

To switch your headlamps to lower or higher beam, gently
pull the turn signal lever towards the steering wheel, until
you hear the switch click and the beam changes. The blue
indicator light in the instrument panel will be ON when the
high beam is being used.

To return to previous beam: pull the lever towards the
steering wheel again.

Headlamp Flash

To activate headlamp flash, gently push the turn signal
lever away from the steering wheel until you hear and feel
the switch click. Release lever to deactivate.

• If your headlamps are off, low beams will flash on.

• If your headlamps are on, they will dim. Maximum

duration of dimming is 3 seconds. When the function
ends, your headlamps will return to low beams.

ID And Clearance Lights Flash

To flash, press the button on the end of the turn signal
lever and hold. To cancel the flash, release the button.

If your ID and clearance lights are on, they will flash off.

Press Button For ID and Clearance Lights Flash

Press In For Washer Pump

Rotate To Change Wiper Mode

Y53-6032.book  Page 36  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments