manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 8: MAINTENANCE AND SERVICE

ENGINE ACCESSORIES

(R05/10)

Y53-6032 

– 211 –

Belt route for Caterpillar Engine

2. Slip the belt around the idler pulley attached to the

automatic tensioner.

3. Release the automatic tensioner.

4. Check the belt alignment on each pulley.  The belt

must fall between the flanges of each pulley.

Fan Clutch / Fan

WARNING! 

Do not work on the fan with the

engine running. The engine fan can engage at
any time without warning. Anyone near the fan
when it turns on could be killed or seriously
injured. Before turning on the ignition, be sure
that no one is near the fan.

Your truck may be equipped with an On/Off or Viscous
Fan Drive.  Follow these guidelines to check your engine
fan:

• Check the fan assembly mounting bolts for tightness.

Inspect the fan blades for damage.

On/Off Fan Drives - Check the clutch operation by starting
the engine when it is cold.  Idle the engine at about 800
RPM.  Listen for air leaks.  Check that the fan is not work-
ing while the engine is warming up.  When the clutch
engages, note the reading on the vehicle's panel-mounted
coolant temperature gauge.  If the fan clutch engages at
low engine temperature or cycles on and off more fre-
quently than it should (receives "false signals"), have the
problem corrected at your dealership.

Y53-6032.book  Page 211  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Garnet MULTIRACK 688-S Manual preview
MULTIRACK 688-S
Brand: Garnet Pages: 14
unicraft EWH Series Instruction Manual preview
EWH Series
Brand: unicraft Pages: 50
Komatsu HD465-7 Brochure preview
HD465-7
Brand: Komatsu Pages: 6
Paccar Kenworth T680 2019 Manual preview
Kenworth T680 2019
Brand: Paccar Pages: 194
Volvo VHD 2003 Service Manual preview
VHD 2003
Brand: Volvo Pages: 68
Kenworth SmartWheel KM816010 Troubleshooting Manual preview
SmartWheel KM816010
Brand: Kenworth Pages: 45
Kenworth K270 Body Builder'S Manual preview
K270
Brand: Kenworth Pages: 96
Peterbilt 220 Operator'S Manual preview
220
Brand: Peterbilt Pages: 136
Adam Equipment PTS 2000 Instructions Manual preview
PTS 2000
Brand: Adam Equipment Pages: 20
Volvo VAH 2013 Operator'S Manual preview
VAH 2013
Brand: Volvo Pages: 175
Volvo L120E Operator'S Manual preview
L120E
Brand: Volvo Pages: 204
Volvo FH 2 Series Service Manual preview
FH 2 Series
Brand: Volvo Pages: 242
U-Line H-1787 Operating Instructions preview
H-1787
Brand: U-Line Pages: 3

Brands by name

Popular brands

Load more brands