manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual, Page: 62 / 239

Share
Download
Paccar Peterbilt 587 Owner'S Manual Download Page 62

GAUGES

PART 4: CONTROLS AND DISPLAYS

– 60 –

 Y53-6032

(R05/10)

NOTE: All of the warning lights and alarms for

functions monitored by the multiplex instrumenta-

tion system instrument system are contained

within the individual gauges of the system. The

alarms for other controls or systems that you may

have will be displayed separately on the instru-

ment panel. They are described further in 

“PART

7: STARTING & OPERATING THE VEHICLE”

 of

this manual.

Speedometer

The speedometer indicates the vehicle speed in miles per
hour (mph) and in kilometers per hour (km/h). The speed-

ometer also includes an odometer, trip meter, and trip
reset button.

Odometer / Trip Meter

The LCD display in the lower part of the speedometer
contains the odometer and trip meter.

The odometer displays the total distance your vehicle has
traveled. It will display in miles on an English speedometer

11243

Trip Reset

Button

Odometer

Trip

Meter

Y53-6032.book  Page 60  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments