manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual, Page: 58 / 239

Share
Download
Paccar Peterbilt 587 Owner'S Manual Download Page 58

DASH-MOUNTED FEATURES

PART 4: CONTROLS AND DISPLAYS

– 56 –

 Y53-6032

(R05/10)

• A rocker switch (E) on the lower center portion to send

power to the “bunk” or sleeper control panel.

• A rocker switch (F) in the lower right portion to select

either fresh or recirculated air mode.

The sleeper control panel will have two controls (see next
illustration):

• A rotary knob in the left portion controlling the blower

speed with four settings.

• A rotary knob in the right portion controlling the air

temperature.

The cab “bunk” control rocker switch must be ON for the
sleeper controls to function.

•

To heat the cab,

 select the desired air mode and set

the temperature knob to hot (the red position on the
control) and the blower to whatever speed makes you
most comfortable.

WARNING! Do not drive with visibility reduced

by fog, condensation, or frost on the wind-
shield. Your view may be obscured, which
could result in an accident involving causing
death or personal injury. For clear visibility

02980B

4

A

B

C

D

E

F

3

2

1

02981B

4

3

2

1

Y53-6032.book  Page 56  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments