manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

ENGINE WARMUP

PART 7: STARTING & OPERATING THE VEHICLE

– 96 –

 Y53-6032

(05/10)

WARNING! Exhaust fumes from the engine
contain carbon monoxide, a colorless and
odorless gas. Do not breathe the engine
exhaust gas. A poorly maintained, damaged or
corroded exhaust system can allow carbon
monoxide to enter the cab or sleeper. Entry of
carbon monoxide into the cab is also possible
from other vehicles nearby. Failure to properly
maintain your vehicle could cause carbon
monoxide to enter the cab/sleeper and causes
death or serious illness.

 

WARNING! Never idle your vehicle for pro-
longed periods of time if you sense that
exhaust fumes are entering the cab or sleeper.
Investigate the cause of the fumes and correct
it as soon as possible. If the vehicle must be
driven under these conditions, drive only with
the windows slightly open. Failure to repair
the source of the exhaust fumes may lead to
death or personal harm.

CAUTION: The use of a winterfront can result
in excessive engine coolant, oil, and charge
air (intake) temperatures, which can lead to
overheating and possible engine damage. If
you must use a winterfront:

• Refer to the “Engine Operation and Mainte-

nance Manual” for operating restrictions
and recommendations.

• Use only a winterfront available from your

Peterbilt dealer that is compatible with a
EPA-compliant engine cooling system.
T h e s e   w i n t e r f r o n t s   a r e   s p e c i f i c a l l y
designed for use with new grill snap pat-
terns.

Y53-6032.book  Page 96  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Paccar Kenworth T170 Hybrid 2011 Builder'S Manual preview
Kenworth T170 Hybrid 2011
Brand: Paccar Pages: 179
Jet PT-1636J Operating Instructions And Parts Manual preview
PT-1636J
Brand: Jet Pages: 12
DAF CF65 Manual preview
CF65
Brand: DAF Pages: 504
U-Line H-7505 Manual preview
H-7505
Brand: U-Line Pages: 15
Magliner MTA2-L Owner'S Manual preview
MTA2-L
Brand: Magliner Pages: 12
RAM PROMASTER CITY Owner'S Manual preview
PROMASTER CITY
Brand: RAM Pages: 280
Scandinavia Auto 75600 Instruction Manual preview
75600
Brand: Scandinavia Auto Pages: 34
Reese 30923 Product Instructions preview
30923
Brand: Reese Pages: 7

Brands by name

Popular brands

Load more brands