manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 4: CONTROLS AND DISPLAYS

DASH-MOUNTED FEATURES

(R05/10)

Y53-6032 

– 53 –

Parking Brake Valve and Trailer Air Supply 
Valve

Your parking brake valve is a yellow diamond-shaped
knob located below the right instrument panel. It controls
the parking brakes. 

To apply all parking brakes, pull the yellow, or parking
brake, knob out. The truck or tractor parking brakes will
set, and the Trailer Air Supply Valve (red octagon knob)
will automatically trip (“pop out”) and set the trailer parking
brakes. To release both truck/tractor and trailer parking
brakes, push in BOTH yellow and red knobs. For full infor-
mation on using parking brakes, see section titled 

“Park-

ing Brakes and Their Use” on page 118

 for more

information.

WARNING! 

• Do not leave the cab without applying the
parking brake. The truck could roll and cause
an accident involving death or personal injury.
Always apply the parking brake before you
leave the cab

• Do not pull out the parking brake valve
while the vehicle is moving. Stopping with the
parking brake controls can cause a sudden
wheel lock-up, loss of control, or over-take by
following vehicles possibly resulting in an
accident involving death or personal injury

• Do not use the trailer hand brake or service
brakes to park and hold an unattended vehi-

cle—use the parking brakes. Because service
brakes work with air pressure, these brakes could
slowly release. Your vehicle could roll, causing a
serious accident. Someone could be hurt or
killed. Never rely on the service brakes to hold a
parked vehicle.

Y53-6032.book  Page 53  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

U-Line H-4884 Assembly Instructions Manual preview
H-4884
Brand: U-Line Pages: 6
HANGCHA CBD20-AEC1 Operation And Maintenance Manual preview
CBD20-AEC1
Brand: HANGCHA Pages: 96
Komatsu HM300-2R Brochure preview
HM300-2R
Brand: Komatsu Pages: 6
Volvo VHD Service Manual preview
VHD
Brand: Volvo Pages: 104
EKKO EP18D Series Manual preview
EP18D Series
Brand: EKKO Pages: 28

Brands by name

Popular brands

Load more brands