manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

TIRES, WHEELS, AND RIMS

PART 8: MAINTENANCE AND SERVICE

– 180 –

 Y53-6032

(R05/10)

WARNING! 

Do not mismatch wheel compo-

nents. Equipment that does not exactly match
original specifications or that is mismatched
could cause the wheels to break and separate
from the vehicle causing death or personal
injury. Each mounting system is engineered for
use only with its correct mating part. Be sure
properly matched components are used for each
type of mounting.

Replacing Tires

WARNING! Do not install regrooved or rein-
forcement-repaired tires on steering axles.
They could fail unexpectedly and cause you to
lose control of your vehicle resulting in an
accident causing death or personal injury. 

Front:

 Replace front tires when less than 4/32 in. of tread

remains. Check at three places equally spaced around the
tire.

Drive Axles or Trailers:

 Replace tires on drive axles or

trailers when less than 2/32 in. of tread depth remains in
any major groove. Check at three places equally spaced
around the tire. See the next illustration for recommended
measuring points for tread depth.

WARNING! .

Do not replace original equipment

tires with load ratings less than the original
tires. Doing so could lead to unintentional over-
loading of the tire, which could cause a failure
resulting in loss of vehicle control and an acci-
dent causing death or personal injury.

Y53-6032.book  Page 180  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Eoslift M Series Operating Instructions Manual preview
M Series
Brand: Eoslift Pages: 14
Chevrolet 6500XD 2022 Owner'S Manual preview
6500XD 2022
Brand: Chevrolet Pages: 312
UD Trucks UD1400 Body Builder'S Book preview
UD1400
Brand: UD Trucks Pages: 385
Labrie EXPERT 2000 2002 Operator'S Manual preview
EXPERT 2000 2002
Brand: Labrie Pages: 69
TruckCraft TC-500 Owner'S Manual preview
TC-500
Brand: TruckCraft Pages: 28
Power Fist 8656878 User Manual preview
8656878
Brand: Power Fist Pages: 16
U-Line MAGLINER H-4938 Assembly preview
MAGLINER H-4938
Brand: U-Line Pages: 2

Brands by name

Popular brands

Load more brands