manualshive.com logo in svg

Paccar Peterbilt 587, Owner'S Manual

The Paccar Peterbilt 587 Owner's Manual is a comprehensive guide that provides essential information for operating and maintaining this exceptional heavy-duty truck. Easily accessible through our website, users can download this manual for free, ensuring they have the necessary knowledge to fully optimize their Peterbilt 587 experience.

Share
Download
background image

PART 3: GETTING TO YOUR ENGINE

HOOD TILT

(R05/10)

Y53-6032 

– 13 –

4. To close the hood, disengage the hood antiblowdown

device by pushing it in the upward direction. The
device will move about 1/4” up the shaft. You may feel
a click when the device disengages.

CAUTION: Attempting to close a hood without
disengaging the hood antiblowdown device
may cause equipment or vehicle damage.

5. Firmly push upward and rearward on the hood orna-

ment to start the hood tilting backwards. Continue to
push until the hood comes is fully closed.

6. Secure the hood latches on both sides of the vehicle

to hold the hood in the closed position.

WARNING! If the hood is not latched securely,
it could open during operation and cause an
accident involving death or injury. Be sure the
hood is latched securely before moving the
vehicle

.

PUSH UP TO 
DISENGAGE 
DEVICE

Y53-6032.book  Page 13  Monday, May 24, 2010  3:37 PM

Summary of Contents for Peterbilt 587
















































































































































































































































Reviews:

No comments

Related manuals for Peterbilt 587

Taylor-Dunn B0-T48-48 Taylor Truck T48 Operation Manual preview
B0-T48-48 Taylor Truck T48
Brand: Taylor-Dunn Pages: 240
U-Line BT H-1003 Instructions Manual preview
BT H-1003
Brand: U-Line Pages: 15
AJ 31090 Operating Instructions Manual preview
31090
Brand: AJ Pages: 68
swaploader SL-400 Parts And Operation Manual preview
SL-400
Brand: swaploader Pages: 136
Daimler Freightliner Business class M2 100 Maintenance Manual preview
Freightliner Business class M2 100
Brand: Daimler Pages: 149

Brands by name

Popular brands

Load more brands