PLATFORM TRUCK WITH FOLDING/
REMOVABLE SIDES
MODEL NO:
CST997.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
TH
HE
P
PR
O
ODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PE
ER
S
SON
NAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Always distribute the load evenly over the surface of the bed.
Always distribute the load evenly over the surface of the bed.
DO NOT
DO NOT
overload the truck. See speci
fi
cation.
overload the truck. See speci
fi
cation.
DO NOT
DO NOT
leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
DO NOT
DO NOT
use the truck on uneven ground.
use the truck on uneven ground.
DO NOT
DO NOT
run over curbs or steps. Use a ramp.
run over curbs or steps. Use a ramp.
DO NOT
DO NOT
allow others to ride on the truck.
allow others to ride on the truck.
DO NOT
DO NOT
use the truck if any part is damaged. Pay particular attention to the wheels.
use the truck if any part is damaged. Pay particular attention to the wheels.
DO NOT
DO NOT
over in
fl
ate the tyres. See speci
fi
cation.
over in
fl
ate the tyres. See speci
fi
cation.
2. INTRODUCTION
Heavy-duty steel with hinged mesh construction. Cushioned grip pull handle with smooth steering action for easy manoeuvrability. Steel
centred pneumatic wheels allow transport over the toughest terrain. Drop-down sides, for easy loading, are also removable, allowing use as
a
fl
atbed for oversized items. Suitable for a variety of warehouse, o
ffi
ce, garden and domestic hauling applications.
3. SPECIFICATION
Model No:. ...........................................................CST997.V2
Capacity: ...................................................................... 200kg
Cart size, internal: ...................................220 x 480 x 930mm
Overall height: ............................................................ 570mm
Platform height: .......................................................... 350mm
Wheel size: ......................................................Ø259 x 90mm
4. ASSEMBLY
Unpack the product and check contents. Should there be any damaged or missing parts contact your supplier immediately.
Refer to attached parts list.
4.1.
ATTACH REAR SUPPORT ASSEMBLY
4.1.1.
Place the truck bed (
fi
g 1 - 1) upside down onto a protected
fl
oor (use original packaging).
4.1.2.
Position rear axle support (
fi
g 1 - 6) onto the truck bed and secure with washer 8mm (
fi
g 1 - 16), nut w/lock insert 8mm (
fi
g 1 - 17)
and M8 x 20 carriage support bolt (
fi
g 1 - 21),
fi
nger tight only.
4.1.3.
Position left rear axle support (
fi
g 1 - 7) and secure with washer 8mm (
fi
g 1 - 16), nut w/lock insert 8mm (
fi
g 1 - 17) and M8 x 20
carriage support bolt (
fi
g 1 - 21),
fi
nger tight only.
4.1.4.
Position right rear axle support (
fi
g 1 - 8) and secure with washer 8mm (
fi
g 1 - 16), nut w/lock insert 8mm (
fi
g 1 - 17) and M8 x 20
carriage support bolt (
fi
g 1 - 21),
fi
nger tight only.
4.1.5.
Fully tighten bolts.
4.2.
ATTACH FRONT AXLE BRACE
4.2.1.
Position front axle brace (
fi
g 2 - 10) onto the truck bed and secure with washer 8mm (
fi
g 2 - 16), nut w/lock insert 8mm (
fi
g 2 - 17)
and M8 x 20 carriage support bolt (
fi
g 2 - 21),
fi
nger tight only.
CST997.V2 Issue 3 05/10/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
fi
g.1
fi
g.2
