otometrics ICS Impulse USB User Manual Download Page 88

Page: 88 / 128

Reanalysis

Analysis Begin Time - All Traces

To exclude data in a trace from the analysis:

1. Move the black cursor to the new begin time in the

Eye Position Traces

window.

2. In the

Analysis Details

window, click the

Reanalysis

window tab.

3. To reanalyze, click

•

Reanalyze from Cursor

- analyzes all traces from where the cursor is placed

•

Reanalyze Full Trace

- analyzes all traces from the beginning

Note

•

The begin time is displayed in the

Info

window.

SPV Graph

Select the trace to modify by choosing

•

Delete Beat

- excludes the beat from the analysis and on the report

•

Restore Beats

- restores all beats that were manually deleted

•

Select Peak

– click a beat and then select peak. A new peak will be set. For more information, refer to the Refer-

ence Manual appendix that describes how the SPV peak is determined.

•

Restore Peak

– restores the peak to the location determined by the algorithm

10.8.3

Playback of data collection

The eye position traces and the eye video can be played back synchronously with the head position feedback or the room
video recorded during testing.

Video Playback buttons and selections

Play

Plays the video

Pause

Pauses the video

Otometrics - ICS Impulse USB

10 Positional

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands