otometrics ICS Impulse USB User Manual Download Page 43

Page: 43 / 128

Remarks

Remarks regarding the test can be entered before, during, and after testing. To add or modify remarks, click the

Remarks

window tab. For information about the editing tools, refer to the Reference Manual.

Note

•

Text previously added in the

Test

window appears in the

Remarks

window.

8.14.3

Playback of data collection

The eye position traces and the eye video can be played back synchronously with the room video.

Video Playback buttons and selections

Play

Plays the video

Pause

Pauses the video

Stop

Stops the video

Play from Cursor

Select to start the playback at the position of the cursor. If not selected, play-
back starts at the beginning of the trace.

Speed

Note

•

Before setting the playback speed, check the recorded frame rate

(fps) stated below the eye video.

•

Normal

- eye video recorded at 30 frames per second can only be

played back at normal speed.

•

Slow

- eye video recorded at 60 frames per second can be played back

at normal or slow speed.

•

Slower

- eye video recorded at > 60 frames per second can be played

back at normal, slow, or slower speed.

Otometrics - ICS Impulse USB

8 Oculomotor

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands