otometrics ICS Impulse USB User Manual Download Page 56

Page: 56 / 128

4. Ask the patient to stare at the fixation dot and move the patients head as described in the Reference Manual. It is

important to have reviewed the ICS Impulse Training Video.

The system automatically stops when the minimum numbers for left and right impulses have been reached.

Displayed in the

Collection

window are:

•

Impulse Type

– name of test for which data has been collected

•

Elapsed Time

– duration of the test

(Also, the test date and time is displayed).

•

Frame Rate

– frequency of data acquisition in frames per second (fps)

•

Calibration ∆

– the distance in pixels between the right and left eye positions measured during calibration

Test Type

Elapsed Time

Frame Rate

Calibration ∆

Note

•

To stop the test early, click

Stop

or press the right button on the presentation remote. Data will be saved.

(Data is saved if at least one good impulse has been collected.) To stop the test early, without saving data, click

Cancel

The data is automatically analyzed and displayed in the 2D Analysis window.

Otometrics - ICS Impulse USB

9 Head Impulse

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands