otometrics ICS Impulse USB User Manual Download Page 91

Page: 91 / 128

3. To begin data collection, click

Start

or click the left button on the presentation remote.

•

Horizontal (HR) and vertical (VR) eye position traces display in the

Eye Position Traces

window. (The default dis-

play is set in

Test Options

•

The real time

SPV

(slow-phase velocity) value is an estimated value calculated according to the amount of vari-

ability around the SPV estimate. The value is displayed in either green or orange in the upper right area of the
window.

–

Green: When the variability is low, there is a high probability that the value is reliable.

–

Orange: When the variability is high, there is less probability that the value is reliable.

Note

•

SPV values displayed in orange should be considered less reliable but not inaccurate.

The real time

SPV

allows the tester to easily monitor the presence or absence of nystagmus. The tester will know

when the nystagmus has subsided and the patient can be moved into the next position.

Note

•

You can find more information in the ICS Impulse training video or at

www.icsimpulse.com

Otometrics - ICS Impulse USB

10 Positional

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands