otometrics ICS Impulse USB User Manual Download Page 15

Page: 15 / 128

Entering test remarks

Test remarks are added in the

Remarks

window that includes editing tools.

Remarks

window

(Head Impulse)

Cut selected text

Copy selected text

Paste text that was cut or copied

Apply bold formatting

Apply italic formatting

Apply underline formatting

Undo actions (text entry, text formatting,
etc.) starting with the most recent action
and proceeding in reverse order of actions
done.

Reverse an undo action starting with the
most recent undo and proceeding in
reverse order of undo actions.

Remarks added during testing are saved according to the test type and session and can be viewed and edited in the

Remarks

window of the selected test.

Editing remarks

Remarks are visible in both the

Test

and

Remarks

windows.

Remarks can be edited in the

Remarks

window of the selected test. In the

Remarks

column of the

Test

window, text can

be added and text can be deleted.

Remarks in the Review Report Options window

Test remarks added during analysis can be viewed in the

Review Report Options

window. Remarks viewed in this window

cannot be edited.

Otometrics - ICS Impulse USB

6 Managing test data

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands