otometrics ICS Impulse USB User Manual Download Page 115

Page: 115 / 128

4. Set the DPI to 100%.

Windows 7

Windows 8

A. Click

Display

B. Select 100%.

C. Click

Apply

A. Click

Appearance and Personalization

B. Click

Make text and other items larger or smaller

C. Select 100%.

D. Click

Apply

5. For

server-only

installations, continue at

Importing demo data

►

117

6. For all other installations, continue at

Connecting the goggles

►

115

14.4

Connecting the goggles

Note

•

The current version of software does not support the previous version of the goggles where the connection to

the computer was through an interface box. The current version of goggles has a single USB cable that connects dir-
ectly to the computer.

1. Remove the cover from the lens of the goggles.

Note

•

Keep the cover. When the goggles are not in use, put the cover back on to prevent dust from accumulating on

the lens.

2. Connect the USB cable to the 2.0 USB connector on the computer.

Note

•

Installing the driver for the goggles takes a few minutes. The message

Hardware not found

displays in the

status bar until the driver is fully installed. A new driver is installed each time new goggles are connected to the USB
port or if the goggles are moved to a new USB port.

3. Continue to

Installing the synchronized room video

►

116

Otometrics - ICS Impulse USB

115

14 Installation and Setup

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands