Displayed in the
Collection
window are:
•
Test Type
– name of test for which data has been collected
(The name includes the test direction and the test conditions.)
•
Elapsed Time
– duration of the test
(Also, the test date and time is displayed).
•
Frame Rate
– frequency of data acquisition in frames per second (fps)
•
Calibration ∆
– the distance in pixels between the right and left eye positions measured during calibration
A.
Test Type
B.
Elapsed Time
C.
Frame Rate
D.
Calibration ∆
The system automatically stops when the maximum test duration is reached. To stop the test early, click
Stop
or press the
right button on the presentation remote. Data will be saved. To stop the test early, without saving data, click
Cancel
. (The
maximum test duration is set in
Test Options
.)
The data is analyzed and displayed in the
Analysis
window.
8.8
Gaze data analysis
To view a specific test, click on the
Test
window tab and then click the desired test to highlight it. For more information
about selecting the test, refer to
Analysis of the test results can be viewed in the
Analysis
window.
•
To enlarge one window within the group, click the small box in the top right corner of that window.
•
To return to the normal viewing mode, click the two overlapping boxes in the enlarged window.
For more information about switching between viewing modes (normal mode or enlarged mode), refer to the Reference
Manual.
Otometrics - ICS Impulse USB
31
8 Oculomotor
