otometrics ICS Impulse USB User Manual Download Page 109

Page: 109 / 128

You can choose to display the report page using these buttons

•

Fit Document to Width

•

Fit Document to Height

•

Fit Document to 100%

After making a change, click

Refresh

to display the change.

System settings

Administrator window

Only users with

Add User as Administrator

selected in their profile have access to this window where user data can be

created, edited, and deleted.

The network locations are set for shared files (videos, reports (PDF), export, and import). For more information, refer to

Changing the storage locations for videos, export, import, report PDFs

►

118

for more information.

List operations

The user data is separated into columns according to the type of information: Last name, first name, user name, etc.

Set up a new user

Important

•

Set up at least one user with administrator privileges.

1. Click

New

2. Enter data. Entries that cannot be left blank are marked with an asterisk (*).

Note

•

The password is case sensitive.

Otometrics - ICS Impulse USB

109

13 System settings

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands