otometrics ICS Impulse USB User Manual Download Page 103

Page: 103 / 128

Reports

Click

Reports

. The

Reports

window (A) opens with the default report. The report includes the last set of data collected for

that patient. Based on the data collected, this is the order of the separate test sections:

Oculomotor

Head Impulse

, and

Positional

Note

•

The reports are generated using vector based graphics. Vector based graphics provide exceptional print quality

and are journal quality for publication submissions.

The default report is automatically saved. To make changes to the current report, refer to

and

Note

•

Changes can be made that apply to all reports (such as which patient data and facility data are included) or

that apply only to the current report. Refer to the Reference Manual.

Otometrics - ICS Impulse USB

103

12 Reports

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands