19
Manufacturer
GN Otometrics A/S
Hoerskaetten 9, 2630 Taastrup
Denmark
(
+45 45 75 55 55
7
+45 45 75 55 59
www.otometrics.com
19.1
Responsibility of the manufacturer
The manufacturer is to be considered responsible for effects on safety, reliability, and performance of the equipment only
if:
•
All assembly operations, extensions, re-adjustments, modifications or repairs are carried out by the equipment man-
ufacturer or personnel authorized by the manufacturer.
•
The electrical installation to which the equipment is connected complies with EN/IEC requirements.
•
The equipment is used in accordance with the instructions for use.
The manufacturer reserves the right to disclaim all responsibility for the operating safety, reliability and performance of
equipment serviced or repaired by other parties.
20
Warning notes
This manual contains information and warnings, which must be followed to ensure the safe performance of the devices and
software covered by this manual. Local government rules and regulations, if applicable, should also be followed at all times.
GN Otometrics ICS products are not designed to be used in conjunction with any devices not approved by GN Otometrics.
Summation of combined unapproved parts could result in increased electrical leakage. All parts of the ICS Impulse system
are suitable for use within the patient environment.
When the ICS Impulse System is used in conjunction with a test device, make sure that all information, cautions, and warn-
ings in the manual for the test device are followed.
For safety specifics concerning test modules and test devices, see the specific manuals.
1. There are no user-serviceable parts inside the ICS Impulse System goggles. For the sake of safety and in order not to
void the warranty, service and repair of electro-medical equipment should be carried out only by the equipment man-
ufacturer or by service personnel at authorized workshops. In case of any defects, make a detailed description of the
defect(s) and contact your supplier. Do not use a defective device.
2. Keep the unit away from liquids. Do not allow moisture inside the unit. Moisture inside the unit can damage the
instrument and it may result in a risk of electrical shock to the user or patient.
3. Do not use the instrument in the presence of flammable agents (gases) or in an oxygen-rich environment.
124
Otometrics - ICS Impulse USB
19 Manufacturer
