otometrics ICS Impulse USB User Manual Download Page 119

Page: 119 / 128

1. Click

System Settings

and click

Administrator

2. Click

Browse...

to browse to the desired folder.

Note

•

If selecting a folder on the network, ensure that the folder you select is configured for sharing.

3. Select the folder and click

The new location for the folder displays in the

OTOsuite Vestibular Storage Locations

window.

Note

•

For each location that has been changed, new files will be stored at the new location. For example, if the loc-

ation has been changed for video files, new video recordings will be stored at the new location.
For each new location, existing files should be moved from the previous location to the new location.

Otometrics - ICS Impulse USB

119

14 Installation and Setup

Summary of Contents for ICS Impulse USB

































































































































Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands

otometrics ICS Impulse USB, User Manual

Search results

Summary of Contents for ICS Impulse USB

Reviews:

Related manuals for ICS Impulse USB

Brands by name

Popular brands